This set of tests is for the NLGI specification for a High Performance Multiuse Grease with a Corrosion Resistance Tag. (NLGI HPM + CR specification). It consists of core tests for the HPM requiremsnts and three additional tests to meet the Corrosion Resistance Tag requirements.
HPM Core Requirements:
Core Penetration (60 stroke AND 100,000 stroke) (ASTM D217)
Elastomer Compatability (ASTM D4289)
Oxidation Stability (ASTM D942)
Water Washout @ 79C (ASTM D1264)
Low Temperature Torque (-20C)(ASTM D1478)
Oil Separation (ASTM D1742 AND D6184)
Roll Stability (ASTM D1831)
Four Ball Wear (ASTM D2266 AND ASTM D2596)
Corrosion Prevention (ASTM D6138 (distilled water) AND ASTM D1743)
Copper Corrosion (ASTM D4048)
Additional tests of the Corrosion Resistance Tag:
ASTM D5969 with 10% Synthetic Sea Water
ASTM D6138 (Emcor Test) with 100% Synthetic Sea Water
ASTM D6138 (EMCOR tEST) with 3% NaCl Solution
Links to the required tests are in the related tests listed below.
Price: $5481.00
Sample size: 2.6 kg
Related tests:
- NLGI HPM – NLGI High Performance Multiuse (HPM) Grease Specification
- ASTM D6138 – EMCOR Rust Test – 2 bearings as per ASTM – please specify type of water
- ASTM D217 – Penetration, Worked Stability, Prolonged 100,000 strokes
- ASTM D5969 – Rust Prevention in Synthetic Sea Water
- ASTM D217 – Penetration, Worked 60 Stroke only
- ASTM D4289 – Elastomer Compatibility SRE-NBR-28/PX (125C, 168 hours)
- ASTM D942 – Pressure Vessel Oxidation @ 100 hrs-2 vessels per method
- ASTM D1478 – Low Temperature Torque – need temperature
- ASTM D1742 – Oil Separation, Storage, of Greases @ 24 hours
- ASTM D6184 – Oil Separation, Wire Cone Method
- ASTM D1831 – Roll Stability 2 hrs.@ Ambient
- ASTM D2266 – Four Ball Wear of Grease
- ASTM D2596 – Load Wear Index of Grease – Weld Load ONLY
- ASTM D1743 – Rust Preventive Properties of Greases
- ASTM D4048 – Copper Corrosion – grease